Stanley 6J 4 PowerCluster LED 阵列 Intelligent LED Solutions 的 PowerCluster LED 阵列 ILR-SK04-xx95-SC211-xx 系列具有 4 个 Stanley Electric 6J 系列 LED。 6J LED 提供出色的亮度,显色指数 (CRI) 超过 95,包括 R9 和 R15 值。 PowerCluster LED 阵列是紧凑型的强大 LED 光源,基于铝基片,以获得最佳热量控制,标准预接了 200mm 电线。 这些多用途 PowerCluster LED 阵列特别适用广泛的应用,包括:一般照明、装饰照明、任务照明、聚光照明、聚光灯、零售和娱乐照明。 PowerCluster LED 阵列包括 4 Stanley Electric 6J 系列 LED 长使用寿命:长达 60,000 小时(原始亮度的 70%) 电流范围高达 800mA M3 螺钉安装孔,易于安装 PowerCluster 尺寸(长 x 宽 x 高):25 x 25 x 3.85mm 配有 200mm 连接电线 PowerClusters 可连接到一起,构成更长的链条 有关合适的次级 LED 光学镜片、散热片、LED 驱动器和热接口材料,请参见数据表 ### 智能 LED 解决方案 LED 模块 - 射灯 警告 * PowerCluster LED 阵列如果未连接到合适的散热片,在运行中将会过热,过热可能导致故障或不可修补的损坏。 请勿使用无电流限制的电源运行 PowerCluster LED 阵列。 连接到无电流限制的恒定电压电源可能导致 PowerCluster LED 阵列的电流消耗超过指定的最大值,并造成故障或不可修补的损坏。
PowerStar IR LED 阵列 - IR OSLON 黑色 4 Intelligent LED Solutions 的 Oslon 4 PowerStar IR 系列 IR LED 阵列具有 4 个 Osram IR Oslon 黑色系列 IR LED。 PowerStars 为基于铝基片的紧凑型强大 LED 光源,可获得最佳热量控制,并预接了 200mm 标准电线。 多用途 IR Oslon 4 Powerstar LED 阵列极其适用于多种应用,包括:监控系统、红外照明相机、机器视觉、夜视灯和驾驶员辅助系统。 Oslon 4 PowerStar IR LED 阵列包含 4 个 Osram IR Oslon 黑色系列 IR LED 电流范围 100 至 1,000mA 使用寿命:多达 100,000 小时(原始亮度的 70%) M3 螺钉安装孔,易于安装 尺寸(长 x 宽 x 高):20mm x 20mm x 3.85mm 预接 200mm 连接电线 PowerStar 可连接到一起,构成更长的链条 有关合适的散热片、恒定电流 LED 驱动器和热接口材料,请参见数据表 ### 注意 取决于操作模式,这些设备发出高度集中的不可见红外光线,可对人眼造成伤害。 ### Intelligent LED Solutions (ILS) 红外 LED 阵列 警告 * LED 阵列如果未连接到合适的散热片,在运行中将会过热。 过热可导致故障或不可修补的损坏。 请勿使用无电流限制的电源运行 PowerStar IR LED 阵列。 连接到无电流限制的恒定电压电源可能导致 PowerStar LED 阵列的电流消耗超过指定的最大值,并造成故障或不可修补的损坏。
ILS Thermal Interface Materials (TIM) - LED Squares The ILA-TIM-SQUARE series, from Intelligent LED Solutions, are a family of thermal heat pads designed specifically for LED squares (58x58mm). They are available in non-adhesive or single/double sided adhesive options. "Features of the ILA-TIM-SQUARE single-sided and non-adhesive: Colour: pewter 0.13mm thick Temperature range: -240°C to +300°C Features of the ILA-TIM-SQUARE double-sided: Colour: cream 0.16mm thick Temperature range: -240°C to +300°C" ### 热敏接口材料,Intelligent LED Solutions 智能 LED 解决方案的 ILA-TIM-XXXX-YY 系列热敏接口材料 (TIM),性能高,经济实惠,设计用于和标准 LED 阵列产品(例如:773-3482)一起使用。 热敏接口材料填充印刷电路板和散热片表层之间的气袋,形成一个连续层,以提高 LED 的散热性。 智能 LED 解决方案提供三种型号的热敏接口材料:双面粘合(后缀 -2A)、单面粘合(后缀 -1A)、无粘合(后缀 -0A)。
ILS Thermal Interface Materials (TIM) - LED Floods The ILA-TIM-xxFL series, from Intelligent LED Solutions, are a family of thermal heat pads designed specifically for LED Floods. They are available in non-adhesive or single/double sided adhesive options. ILS" family of LED floods are very powerful LED light sources with integrated control and command. They utilise OSRAM"s OSLON SSL® series, Dragons series or Stanley Electric"s CRI 95 series. They come in either 17, 27 or 72 LED options. "Features of the ILA-TIM-xxFL single-sided and non-adhesive: Colour: pewter 0.13mm thick Temperature range: -240°C to +300°C Features of the ILA-TIM-xxFL double-sided: Colour: cream 0.16mm thick Temperature range: -240°C to +300°C" 热敏接口材料,Intelligent LED Solutions 智能 LED 解决方案的 ILA-TIM-XXXX-YY 系列热敏接口材料 (TIM),性能高,经济实惠,设计用于和标准 LED 阵列产品(例如:773-3482
ILS 热敏接口材料 (TIM) - SCOB LED Intelligent LED Solutions 的一系列 TIM(热敏接口材料)垫旨在用于与 Duris S8 和 S10 系列 SCOB LED 一起使用。 热导性垫可在 LED 模块及其关联的散热片之间提供必要接口 - 它们有助于确保高效工作和长工作寿命。 该垫可提供各种尺寸,带单端口和双面粘结剂选项。 ### 热敏接口材料,Intelligent LED Solutions 智能 LED 解决方案的 ILA-TIM-XXXX-YY 系列热敏接口材料 (TIM),性能高,经济实惠,设计用于和标准 LED 阵列产品(例如:773-3482)一起使用。 热敏接口材料填充印刷电路板和散热片表层之间的气袋,形成一个连续层,以提高 LED 的散热性。 智能 LED 解决方案提供三种型号的热敏接口材料:双面粘合(后缀 -2A)、单面粘合(后缀 -1A)、无粘合(后缀 -0A)。