Pramet DCMT 插件 适合与 SDJC、SDNCN、SDQC、SDUC、SDZC 固定器和杆一起使用。 ### T8330 特别适用于加工钢、不锈钢和铸铁 可接受用于超合金 ### T9325 特别适用于加工钢和不锈钢 可接受用于铸铁 特别适用于加工钢 可接受用于铸铁和硬质钢 ### T9315 ### 旋转插件 ### ISO 参考细分 较高编号 = 较坚硬/抗冲击性 较低编号 = 较硬/耐磨 ### TU5525 the New Universal Turning Grade TU5525 is a truly universal tuning grade suitable for cutting Steel, Stainless Steel, Cast Iron and heat resistant Aaloys. There is no need to hold stock of a multitude of grades reducing the cost of inventory and time wasted changing inserts. One insert for almost all applications. If insert breakage or chipping of the cutting edge is a problem TP2135 may be the answer. Some application do not offer the cutting edge a constant cutting surface whether from a non round part or holes in the part this constant impact on the cutting edge can lead to insert failing. TP2135 is designed to take higher impact loads giving a more secure cutting edge, suitable for cutting steel, stainless steel and heat resistant alloys. ### TP2135 a Tough Impact Resistant Grade ISO 参考 --- ISO REF: SCLCR2525M12 **T**= 形状 **N**= 间隙角 **M**= 容差 **G**= 类型 **16**= 切削刃长度 **04**= 厚度 **04**= 角半径 **E**= 切削刃 **R**= 切割方向
Pramet TNMG 插件 TNMG 负角车削刀粒，与 DTGN、DTFN、PTFN、PTGN、PTTN、PTFN 和 MTJN 座和杆一起使用。 ### T9315 特别适用于加工钢 可接受铸铁和硬质钢 ### T9325 特别适用于加工钢和不锈钢 可接受铸铁 特别适用于加工钢 可接受不锈钢 ### T9335 ### 旋转插件 ### ISO 参考细分 较高编号 = 较坚硬/抗冲击性 较低编号 = 较硬/耐磨 ### TU5525 the New Universal Turning Grade TU5525 is a truly universal tuning grade suitable for cutting Steel, Stainless Steel, Cast Iron and heat resistant Aaloys. There is no need to hold stock of a multitude of grades reducing the cost of inventory and time wasted changing inserts. One insert for almost all applications. If insert breakage or chipping of the cutting edge is a problem TP2135 may be the answer. Some application do not offer the cutting edge a constant cutting surface whether from a non round part or holes in the part this constant impact on the cutting edge can lead to insert failing. TP2135 is designed to take higher impact loads giving a more secure cutting edge, suitable for cutting steel, stainless steel and heat resistant alloys. ### TP2135 a Tough Impact Resistant Grade ISO 参考 --- ISO REF: SCLCR2525M12 **T**= 形状 **N**= 间隙角 **M**= 容差 **G**= 类型 **16**= 切削刃长度 **04**= 厚度 **04**= 角半径 **E**= 切削刃 **R**= 切割方向
